|
-
The 7000 series AC/DC scales use a lead acid, Gell
Cell type battery. These batteries are susceptible to premature damage if
they go into what is known as a deep discharge state. For this reason it
is always a good idea to keep the scales plugged in and charging whenever
they are not in use.
-
Be sure that the scales are being charged back up as soon as the
“Lo Batt” message comes up on the display. (To
prevent a deep discharge from occurring.)
Be sure the power is not being turned off to the receptacles
being used to recharge the scales. (This will sometimes happen when
leaving at the end of a shift, or over a weekend.)
Who Do I Contact
For Service?
|
